hifi engine

Manual Library / Yamaha

Yamaha RX-E810

Stereo Receiver (2006)

add a review add a review

Yamaha RX-E810


Tuning range: FM, MW

Power output: 40 watts per channel into 6Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.04%

Damping factor: 60

Input sensitivity: 150mV (line)

Signal to noise ratio: 93dB (line)

Channel separation: 45dB (line)

Output: 150mV (line), 2V (Pre out)

Speaker load impedance: 6Ω (minimum)

Dimensions: 215 x 108 x 382mm

Weight: 5.7kg

Finish: gold, black, silver

Accessories: remote control

Year: 2006



re: RX-E810

RX-E410 and RX-E810 have the same schematics.
If they don't power up, check C8 (22nF 630V) near mains plug, very often out of service !

This website is not affiliated with or sponsored by Yamaha. To purchase RX-E810 spares or accessories, please contact the company via their website or visit an authorised retailer.