hifi engine

Manual Library / Yamaha

Yamaha RX-V496

Natural Sound Audio Video Receiver

add a review add a review

Yamaha RX-V496


Tuning range: FM, MW

Power output: 70 watts per channel into 8Ω (stereo)

Surround output: 70W (front), 70W (center), 70W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.06%

Damping factor: 60

Input sensitivity: 150mV (line)

Signal to noise ratio: 100dB (line)

Channel separation: 45dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Digital inputs: coaxial, optical

Video Connections: composite, SVHS

Dimensions: 435 x 151 x 391mm

Weight: 10kg

Accessories: remote control



re: RX-V496

As I was hooking up the speakers one of the speaker wire landed on a live socket and arced.

Is it possible the fuse took the surge or is the system dead?

Thanks in advance.

pranoto's picture

re: RX-V496

i have one of yamaha RX-V496 since 2000.And i still use it.but some button on the remote doesn't work.can you help me?

karodimitrov's picture

re: RX-V496

Open the remote and rubin the back side of button with soft pensil.(2B,4B).

This website is not affiliated with or sponsored by Yamaha. To purchase RX-V496 spares or accessories, please contact the company via their website or visit an authorised retailer.