hifi engine

Manual Library / Yamaha

Yamaha YST-SW800

Advanced Active Servo Subwoofer System (2002-03)

add a review add a review

Yamaha YST-SW800


Type: single driver subwoofer

Frequency Response: 18Hz to 160Hz

Sub Bass: 1 x 250mm cone

Finish: black, cherry

Dimensions: 390 x 482 x 420mm

Weight: 24kg

Note: 1000W power amplifier


Related Catalogues

Digital Home Theater

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: YST-SW800 Servo driven?

Inside the 6 Ohm Speaker is connected to an „normal” amp-output only with two wires.

There is no sensor inside, which is could be controlled by everything.
I have (after two times the amp inside the yst800 are gonna dead) put the electronic out, have closed the hole on back with a 20 mm MDF plate and use a „discreed” Subwoofer amplification with an actice X-Over, a small mixer (to bring left and rigth channel to mono) and a bridged poweramp how is connected with the Yamaha bass speaker. See picture http://www.kc.to/images/YST-IMG-Tmix-Peavey-dbx.jpeg

This website is not affiliated with or sponsored by Yamaha. To purchase YST-SW800 spares or accessories, please contact the company via their website or visit an authorised retailer.